Skip to content Skip to footer
amg sealing ⚙️

Ring Type Joints

Heavy duty, high pressure gaskets

ring type joints | amg sealing ⚙️

Precision Machined. High Quality Gaskets.

Ring Type Joint gaskets are precision-machined metallic gaskets. They are typically used in high-pressure applications such as the Oil, Gas, Petrochemical and Offshore industries.

This type of gasket is designed to be used in RTJ groove flanges and is produced under license to dimensions as per API-6A and ASME B16.20.

Contact Our Team
AMG - Placeholder


Technical Details

  • Ring Type Joints concentrate the bolt load over a small area producing high sealing stresses.
  • As the Ring Type Joint Material should always be softer than the mating flanges, the high seating stress causes ”plasticflow” of the ring joint in the flange faces creating the seal.
  • RTJ Gaskets can be produced from a variety of material’s to suit the process application and flange grade.
  • Used on high pressure lines up to 20,000 PSI, RTJ’s are an extremely reliable and robust sealing mechanism.
  • BX, SBX & RX type available for Sub Sea application.
  • IX Seal Rings used in Norsok Compact flange assemblies.
  • Standard R type available R11 (1/2”) to R105 (36”) in Oval or Octagonal Section.
Download Ring Type Joints Data Sheet
precision technical diagram

Oval & Octagonal

Oval and Octagonal section Ring type Joints are designed for flanges with standard ring type grooves. These standard shapes are used to seal pressures up to 5,000 psi in accordance with API 6A.

The Octagonal cross section has a higher sealing efficiency than the Oval cross section and is therefore preferred.

The oval section ring joints were originally designed for the now obsolete round bottom groove. Both the Oval and the Octagonal cross section are interchangeable on the flat bottom groove design.

precision technical diagram


BX Ring Type Joints are designed for pressures up to 20,000 psi, suitable only for use with API type BX flanges and grooves.

The gasket has a square cross section with bevelled corners. The average diameter of the ring joint is slightly greater than that of the flange groove. This way, when the ring joint is seated, it stays pre-compressed by the outside diameter, creating high seating stress.

precision technical diagram


RX Ring Type Joints are designed for pressures up to 5,000 psi, they are pressure activated ring joints designed to use the fluid pressure to increase sealability.

The outside sealing surface of the ring joint makes the initial contact with the flange. Then, as the internal pressure rises the contact pressure between ring joint and flange also increases. This is sometimes referred to as a pressure activated ring joint due to the shape of the gasket.

High seating pressures are created increasing the sealability. This design characteristic makes the RX more resistant to vibrations, pressure surges and shocks that occur during oil well drilling.

precision technical diagram

IX Seal Ring

IX Seal rings are designed to be used in Norsok CompactFlange Connections (CFC).

Available in different materials, IX rings are supplied with colour coded PTFE coating to denote base material supplied.

Unlike all of the other RTJ’s supplied, markings are on the inside of the ring in accordance to Norsok L-005 standard.


Ring Type Joint Materials.

AMG has the largest independent stock of RTJ in the UK covering Soft Iron and AISI 316L in R, BX and RX profiles.

Other readily available grades include AISI 316L Max BHN 135, AISI 304, AISI 321, AISI 347, F-5, Duplex S31803, S31254, Hastelloy C276, Inc 625, Inc 825.

AMG - Placeholder
Contact our team Monday — Friday 8am to 5pm

Give our team a call: +44 (0)1484 723 800
Or email us: